FTX EVO30 1/10 BRUSHED STREET CAR RTR – RED

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 9kg Etronix metal geared steering servo, Hobbywing brushed WP1040 esc, 17T 550 brushed motor all powered by a Voltz 2000mAH Ni-MH battery making it the perfect choice for entry level users.

Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set.

Hit the throttle and burn rubber with the FTX EVO30!

Features

• 99% Ready-to-run
• Etronix 2.4ghz 5ch Radio System
• Hobbywing WP1040 Brushed Speed Control
• 17T 550 Sized Brushed Motor
• Voltz 2000mAH Ni-Mh Battery Pack
• Etronix Waterproof 9kg Metal Geared Servo
• USB Charger
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included
• Rubber Street and Hard Slick Drift tyre sets
• Front & Rear Metal Gear Sealed Differential
• Front CVD Universal Driveshafts
• Ball Bearings Throughout
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

KEY:https://www.cmldistribution.co.uk/img/red-large.png 2x” alt=”Out of stock” width=”35″ height=”20″ style=”box-sizing: border-box; border: 0px; vertical-align: middle; margin-right: 6px; margin-top: -4px;” title=”Out of stock” /> OUT OF STOCKhttps://www.cmldistribution.co.uk/img/orange-large.png 2x” alt=”Only a few remaining” width=”35″ height=”20″ style=”box-sizing: border-box; border: 0px; vertical-align: middle; margin-right: 6px; margin-top: -4px;” title=”Only a few remaining” /> VERY LOW STOCKhttps://www.cmldistribution.co.uk/img/yellow-large.png 2x” alt=”Low stock” width=”35″ height=”20″ style=”box-sizing: border-box; border: 0px; vertical-align: middle; margin-right: 6px; margin-top: -4px;” title=”Low stock” /> LOW STOCKhttps://www.cmldistribution.co.uk/img/green-large.png 2x” alt=”In Stock” width=”35″ height=”20″ style=”box-sizing: border-box; border: 0px; vertical-align: middle; margin-right: 6px; margin-top: -4px;” title=”In stock” /> IN STOCK

FTX KANYON 4X4 MOUNTAIN RESCUE 2-SPEED RTR 1:10 XL CRAWLER

Mountain Rescue teams around the world risk life and limb to help others. Whether it’s in the mountains of the UK such as Snowdonia, Brecon or the Scottish Highlands or trails in the Alps and Pyrenees these predominantly volunteer teams are ready for a distress call for help.

FTX’s new Mountain Rescue edition Kanyon looks to capture the go anywhere mindset of rescue teams by including some new features over the standard Kanyon. A switchable 2-speed gearbox provides high and low speeds to help navigate rough and smooth terrain, whilst a front bumper mounted winch can be operated from the transmitter to haul you out of trouble.

The iconic Kanyon body comes finished in a new mountain rescue inspired livery and a radio antenna is included for when you must contact base camp on the walkie-talkie.

A 60T brushed motor provides the torque, while the same metal output gears, locked axles and multi-link suspension produce the drive you need to pretty much scale over most obstacles.

With a moulded roof rack ready for you to load with scale rescue accessories, you don’t need to waste too much time before you are ready for your first emergency call out!

FEATURES

• 99% Ready-To-Run
• Etronix 2.4ghz radio
• Etronix 9Kg waterproof steering servo
• 60Amp Waterproof brushed crawler ESC
• 60T High torque brushed motor
• Voltz 1800mAh NiMH 7.2v Battery
• USB 600mA charger
• Receiver box
• Switchable 2-speed gearbox
• Front and rear straight locked axles
• Link suspension for maximum articulation
• Telescopic sliding centre driveshafts
• Front CVA steering universal driveshafts
• Centre compact 3-gear transmission
• Front, centre & rear diff lockers
• Metal output, crown and diff gears
• Oil filled adjustable shock absorbers
• Aluminium front/rear bumper & body mounts
• Scale inspired rescue style bodyshell
• Moulded fenders, roof rack & light bar
• Front and rear moulded bumpers
• Working front bumper winch
• Scale styled wheels w/super soft block tyres
• 13 Factory fitted LED lights

Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FTX Banzai Features:

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

Spec Check:

• Length: 440mm
• Width: 195mm
• Height: 130mm
• Wheelbase: 255mm – 256mm
• Front Tyre: 24 x 60mm
• Rear Tyre: 24 x 60mm
• Gear Ratio: 6.5:1

Since it’s release over six years ago the FTX Carnage has become a huge favourite with beginners looking for an affordable entry into the world of R/C. Well we thought it was about time this fan favorite had a face lift with the Carnage 2.0. Two new bodyshell schemes and colours, chrome plated wheels, Etronix 3ch radio and a new 60amp rated brushed esc means the Carnage legacy is set to continue for a long time to come!

FEATURES

• 2.4Ghz Etronix Pulse EX3G Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• Wall charger for battery
• New Blue Graphic Truck Body
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Chrome plated wheels & block tyres

SPECIFICATIONS

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

7.2v battery 2000MAH for most 1/10 cars 

PLEASE NOTE

Upgrade to a 3000mah Battery available for £5.00 Extra

Add a Box of 10 AA Cells Duracell Procell for Transmitter for Extra £6.00

Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FTX Banzai Features:

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

Spec Check:

• Length: 440mm
• Width: 195mm
• Height: 130mm
• Wheelbase: 255mm – 256mm
• Front Tyre: 24 x 60mm
• Rear Tyre: 24 x 60mm
• Gear Ratio: 6.5:1

Fans of electric power can now enjoy the semi-scale realism and cool r/c driving experience of the Zorro with this new brushed electric edition. Featuring trailing link rear suspension just like the desert trophy trucks racing in the New Mexico deserts, the Zorro is one awesome package for any fan of extreme trucks. For something a little different we have added a bit of colour to the Zorro EP, with some blue moulded suspension parts and roll cage accessories, just to liven things up a little instead of bland old black! This full featured brushed truck is a perfect entry in to 1/10th scale r/c and represents great value with a 60A speed control, Etronix radio sys-tem and Voltz 1800mAh battery pack. Not to mention the blue anodised aluminium shock absorbers front and rear, metal differential and crown gears and sealed 4wd shaft drive tranmission. Get ready to hit the rough stuff and watch the Zorro soak’s it up like a champ!

1. FEATURES 99% Ready-to-run Etronix EX3G 3ch 2.4ghz radio Etronix waterproof
2. 3kg steering servo 60A Waterproof speed control for NiMh/LiPO 550 Brushed motor
3. Voltz 1800mAh NiMH 7.2v Battery
4. Wall charger
5. Pre-painted Trophy Truck bodyshell Tubular style internal roll cage w/spare tyre
6. Tubular front bumper with skid plate
7. Internal driver cockpit Moulded tub chassis
8. Sealed transmission
9. 4wd shaft drive Trailing arm rear link suspension
10. Receiver box
11. Lightweight high impact arms
12. Alum. big bore oil filled adjustable shocks
13. Gearbox metal crown & pinion gear
14. Front universal driveshafts
15. Adjustable turnbuckles
16. Fully adjustable suspension including, droop, camber, toe-in
17. Chassis accepts NiMh or LiPo battery
18. Wide range of option parts available